AEG L 60260 FL user manual Positioning and Levelling

Page 31

ENGLISH 31

12. Replace the plastic spacers with the plastic caps. You can find these caps in the user manual bag.

– We recommend that you keep the packaging and the transit bolts for when you move the appliance.

–If the appliance is delivered in the winter months when there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.

POSITIONING AND LEVELLING

x4

• Install the appliance on a flat hard floor.

• Make sure that carpets do not stop the air circulation below the appli- ance.

• Make sure that the appliance does not touch the wall or other units

• Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibra- tion, noise and the movement of the appliance when in operation.

Image 31

Contents 60260 FL Service ContentsFor Perfect Results Accessories and ConsumablesVisit OUR Website for Installation Safety InformationGeneral Safety Care and CleaningDiscard the Appliance Water connectionEcological Hints Environment ConcernsTechnical Information Packaging MaterialsProduct Description AccessoriesProgramme Knob Control PanelOn OFF Button DisplayExtra Rinse Button Delay Start ButtonSTART/PAUSE Button Time Save ButtonPermanent Extra Rinse Function Temperature ButtonAcoustic Signals Function Child Lock FunctionProgrammes Programme Energy consumption Water consump Consumption ValuesStandard programmes for the Energy Label consumption values Before First USE Using the ApplianceLoading the Laundry Check the position of the flap Filling the Detergent and AdditivesCancel a Programme Setting and Starting a ProgrammeInterrupt a Programme Change a Function SET the Delay StartCancel the Delay Start AT the END of the ProgrammePage Detergents and Additives Hints and TipsLaundry Load Stubborn StainsLevel Type Water hardness Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserEnglish Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsProblem Possible cause Possible solution TroubleshootingDelay start is set Problem Possible cause Possible solution Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop devicePage English 132936510-A-212011