AEG L 60260 FL user manual Installation, Unpacking

Page 29

ENGLISH 29

INSTALLATION

UNPACKING

1. Use the gloves. Remove the exter- nal film. If necessary, use a cutter.

2. Remove the cardboard top.

3. Remove the polystyrene packaging materials.

4. Remove the internal film.

5. Open the door and remove all the items from the drum.

Image 29

Contents 60260 FL Service ContentsVisit OUR Website for Accessories and ConsumablesFor Perfect Results General Safety Safety InformationCare and Cleaning InstallationDiscard the Appliance Water connectionTechnical Information Environment ConcernsPackaging Materials Ecological HintsProduct Description AccessoriesOn OFF Button Control PanelDisplay Programme KnobSTART/PAUSE Button Delay Start ButtonTime Save Button Extra Rinse ButtonAcoustic Signals Function Temperature ButtonChild Lock Function Permanent Extra Rinse FunctionProgrammes Programme Energy consumption Water consump Consumption ValuesStandard programmes for the Energy Label consumption values Loading the Laundry Using the ApplianceBefore First USE Check the position of the flap Filling the Detergent and AdditivesInterrupt a Programme Setting and Starting a ProgrammeCancel a Programme Cancel the Delay Start SET the Delay StartAT the END of the Programme Change a FunctionPage Laundry Load Hints and TipsStubborn Stains Detergents and AdditivesLevel Type Water hardness Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserEnglish Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsProblem Possible cause Possible solution TroubleshootingDelay start is set Problem Possible cause Possible solution Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop devicePage English 132936510-A-212011