16Use
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph «Something not working»).
End of programme
TIEMPO RESTANTE
When the programme has finished a flashing zero is displayed, the «Door» pilot light and the Start/Pause light go out and the door can be opened.
Select the «Start/Pause»
TIEMPO RESTANTE
To start the selected programme, press the Start/Pause button; the corresponding red pilot light stops flashing.
The washing pilot light is on to indicate that the appliance starts operating.
The door pilot light is on to indicate the door is locked.
TIEMPO RESTANTE
SOBRE DOSIF. 
AQUACARE
START/PAUSA
To interrupt a programme which is running, depress the Start/Pause button: the corresponding red pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the Start/Pause button again.
If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, the integrated yellow pilot light of the Start/Pause button flashes for 3 times the message Err is displayed for about 2 seconds.
Select the Delay Start
Before you start the programme, if you wish to delay the start, press the Delay Start button repeatedly, to select the desired delay.
The selected delay time value (up to 20 hours) will appear on the display for about 3 seconds, then the duration of the programme will appear again.
TIEMPO RESTANTE | INICIO DIFERIDO |