AEG 72640 user manual Washing drum, Door seal

Page 30

30Care and cleaning

2.Remove the conditioner insert from the middle compartment.

3.Clean all parts with water.

4.Put the conditioner insert in as far as it will go, so that it is firmly in place.

5.Clean all parts of the washing ma-

chine, especially the nozzles in the top of the washing-in chamber, with a brush.

6. Insert the detergent dispenser drawer in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.

1.Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2.Run a washing cycle without any washing to clean off any cleaning agent residues. Programme: COTTONS/LINEN 95, press the QUICK WASH button, add approx. 1/4 measuring cup of detergent.

Door seal

Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.

Image 30

Contents Lavamat Dear Customer Contents International wash code symbols Care and cleaning 29-33 At the end of the programme Child safety lockConsumption value Installation 40-44 Packaging materials Old machine Ecological hintsSafety information Prior to using for the first timeGeneral safety Installation UseChild Safety Keep all detergents in a safe place out of children’s reachProduct description Detergent dispenser drawerControl panel First UseDaily Use Acoustic signalsPersonalization Load the laundrySelect the required programme If required, pour fabric softener intoSelect the spin speed or the rinse hold option Programme option buttonSelect the Sensitive option Select the Prewash optionSelect the Stain option Select the Quick optionDelay Start icon will appear on the display DisplayDisplay shows the following information Select the Delay Start Select the «Start/Pause»Door pilot light is on to indicate the door is locked Delay Start can not be selected with Drain programme Programme progress displayAltering an option or a running programme Cancelling a programmeSelect an additional rinse Interrupting a programmeChild safety lock At the end of the programmeThere are two different ways to set this option Washing programmes Rinses Drain Spin Refresh Off/OProgramme informations Wool Handwash /Silk Rinses Drain Spin RefreshSorting out the laundry TemperaturesPreparing the wash cycle Before loading the laundryLaundry weights Following weights are indicativeMaximum loads Removing stains Detergents and additives Quantity of detergent to be usedMarked before starting the wash programme Degrees of water hardness International wash code symbols Care and cleaning Washing drum Door sealDrain pump Clean the pump if necessary as previously described Water inlet filterEmergency emptying out Frost precautions Something not working Washing machine does not start Machine does not fillMachine fills then empties immediately There is water on the floor Unsatisfactory washing resultsCause possible/Solution Problem Cause possible/Solution Drum light doesn’t work Techinical Data Door includedConsumption value White Cottons Synthetics Easy Iron DelicatesRinses Drain Spin Refresh Eco Installation UnpackingPolystyrene base from the bottom Installation Positioning and levelling Water inletConnect the hose with the angled connection to the machine End of the drain hose can be positioned in three ways Water-stop deviceWater drainage Drain hose must not be kinkedElectrical connection Permanent connectionOld machine Enviroment concernsPackaging materials Ecological hintsEuropean Guarantee Customer service centres 132 969 551-00-352007 Subject to change without notice

Related manuals

Manual 56 pages 40.16 Kb