AEG 72640 user manual Degrees of water hardness

Page 27

Preparing the wash cycle 27

Degrees of water hardness

Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority.

Note: A water softener must be added when water has a medium-high degree of hardness (from degree of hardness II). Follow the manufacturer’s instructions. The quantity of detergent can then always be adjusted to degree of hardness I (= soft).

		Degrees of water hardness
Level	Characteristic	German	French
		°dH	°T.H.
1	soft	0-7	0-15
2	medium	8-14	16-25
3	hard	15-21	26-37
4	very hard	> 21	> 37

Image 27

Contents Lavamat Dear Customer Contents At the end of the programme Child safety lock International wash code symbols Care and cleaning 29-33Packaging materials Old machine Ecological hints Consumption value Installation 40-44Safety information Prior to using for the first timeGeneral safety Use InstallationKeep all detergents in a safe place out of children’s reach Child SafetyDetergent dispenser drawer Product descriptionFirst Use Control panelLoad the laundry Acoustic signalsPersonalization Daily UseIf required, pour fabric softener into Select the required programmeProgramme option button Select the spin speed or the rinse hold optionSelect the Quick option Select the Prewash optionSelect the Stain option Select the Sensitive optionDelay Start icon will appear on the display DisplayDisplay shows the following information Select the Delay Start Select the «Start/Pause»Door pilot light is on to indicate the door is locked Programme progress display Delay Start can not be selected with Drain programmeInterrupting a programme Cancelling a programmeSelect an additional rinse Altering an option or a running programmeChild safety lock At the end of the programmeThere are two different ways to set this option Washing programmes Off/O Rinses Drain Spin RefreshWool Handwash /Silk Rinses Drain Spin Refresh Programme informationsBefore loading the laundry TemperaturesPreparing the wash cycle Sorting out the laundryLaundry weights Following weights are indicativeMaximum loads Removing stains Detergents and additives Quantity of detergent to be usedMarked before starting the wash programme Degrees of water hardness International wash code symbols Care and cleaning Door seal Washing drumDrain pump Clean the pump if necessary as previously described Water inlet filterEmergency emptying out Frost precautions Washing machine does not start Machine does not fill Something not workingThere is water on the floor Unsatisfactory washing results Machine fills then empties immediatelyCause possible/Solution Problem Cause possible/Solution Drum light doesn’t work Door included Techinical DataConsumption value White Cottons Synthetics Easy Iron DelicatesRinses Drain Spin Refresh Eco Installation UnpackingPolystyrene base from the bottom Installation Positioning and levelling Water inletConnect the hose with the angled connection to the machine Drain hose must not be kinked Water-stop deviceWater drainage End of the drain hose can be positioned in three waysPermanent connection Electrical connectionEcological hints Enviroment concernsPackaging materials Old machineEuropean Guarantee Customer service centres 132 969 551-00-352007 Subject to change without notice

Related manuals

Manual 56 pages 40.16 Kb