AEG 72640 user manual Positioning and levelling, Water inlet

Page 42

42Installation

Positioning and levelling

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc.

Before placing it on small tiles, apply a rubber coating.

Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.

If it is impossible to avoid positioning the machine next to a gas cooker or coal-burning stove, an insulating panel covered with aluminium foil on the side facing the cooker or stove, must be inserted between the two appliances.

The machine must not be installed in rooms where the temperature can drop below 0.

HEC007S

The water inlet hose and the drain hose must not be kinked.

Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Water inlet

An inlet hose is supplied and can be found inside the machine drum.

Do not use the already employed hoses to connect to the water supply. This appliance must be connected to a cold water supply.

1.Open the porthole and extract the inlet hose.

2.Connect the hose with the angled connection to the machine.

Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap.

HEC0006

Image 42

Contents Lavamat Dear Customer Contents International wash code symbols Care and cleaning 29-33 At the end of the programme Child safety lockConsumption value Installation 40-44 Packaging materials Old machine Ecological hintsSafety information Prior to using for the first timeGeneral safety Installation UseChild Safety Keep all detergents in a safe place out of children’s reachProduct description Detergent dispenser drawerControl panel First UseDaily Use Acoustic signalsPersonalization Load the laundrySelect the required programme If required, pour fabric softener intoSelect the spin speed or the rinse hold option Programme option buttonSelect the Sensitive option Select the Prewash optionSelect the Stain option Select the Quick optionDelay Start icon will appear on the display DisplayDisplay shows the following information Select the Delay Start Select the «Start/Pause»Door pilot light is on to indicate the door is locked Delay Start can not be selected with Drain programme Programme progress displayAltering an option or a running programme Cancelling a programmeSelect an additional rinse Interrupting a programmeChild safety lock At the end of the programmeThere are two different ways to set this option Washing programmes Rinses Drain Spin Refresh Off/OProgramme informations Wool Handwash /Silk Rinses Drain Spin RefreshSorting out the laundry TemperaturesPreparing the wash cycle Before loading the laundryLaundry weights Following weights are indicativeMaximum loads Removing stains Detergents and additives Quantity of detergent to be usedMarked before starting the wash programme Degrees of water hardness International wash code symbols Care and cleaning Washing drum Door sealDrain pump Clean the pump if necessary as previously described Water inlet filterEmergency emptying out Frost precautions Something not working Washing machine does not start Machine does not fillMachine fills then empties immediately There is water on the floor Unsatisfactory washing resultsCause possible/Solution Problem Cause possible/Solution Drum light doesn’t work Techinical Data Door includedConsumption value White Cottons Synthetics Easy Iron DelicatesRinses Drain Spin Refresh Eco Installation UnpackingPolystyrene base from the bottom Installation Positioning and levelling Water inletConnect the hose with the angled connection to the machine End of the drain hose can be positioned in three ways Water-stop deviceWater drainage Drain hose must not be kinkedElectrical connection Permanent connectionOld machine Enviroment concernsPackaging materials Ecological hintsEuropean Guarantee Customer service centres 132 969 551-00-352007 Subject to change without notice

Related manuals

Manual 56 pages 40.16 Kb