How to wash
At the end of the programme
The machine stops automatically. A steadly zero appears on the display. The FIN (END) light comes on in the programme progress display, the START/PAUSE button goes off and the light PUERTA is green.
If the RINSE HOLD option has been selected, the START/PAUSE button goes off, the pilot light END on the programme progress display illumi- nates, the light PUERTA is red and the display shows a static zero to indi- cate that the water must be emptied out.
To empty out water there are two possibilities:
•Select programme “DESAGUAR” (draining): The water is emptied out without spinning.
•Select programme “CENTRIFUGAR” (spin) or “CENTRIF. DELICADO” (delicate spin). Select the spin speed by means of the relevant button and then depress the START/PAUSE button. The water is emptied out and the laundry is spun at the selected spin speed.
Warning! The programme selector dial must be turned first to RESET O/OFF and then to the DRAIN programme DESAGUAR, CENTRIFU- GAR (spin) or CENTRIF. DELICADO (delicate spin).
Turn the selector dial to O/OFF to switch the machine off. Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas- ant smells.
67