How to wash
Starting the programme
1.Check that the water tap is open and the door is closed.
2.Press START/PAUSE to start the programme.
If the Delay Start option has been selected the programme will start at the end of the countdown.
If the light FIN (END) is flashing at the start of the programme it indi- cates that the door is open. Close the door and press the START/PAUSE button again.
If the delay start option has been selected, the machine starts its countdown, in hours for the first two hours and then every 30 min- utes, which will appear on the display. During this period it is possible to load other laundry, or to cancel the delay time.
•Load other laundry: press the START/PAUSE button. Open the door. Load the laundry. Close the door and press the START/PAUSE button again.
•Cancel the delay time: press the START/PAUSE button. Press the DELAY START button until the symbol 0’ appears on the display. Press the START/ PAUSE button again if you wish to restart the pro- gramme.
Programme progress display
By selecting the wash programme, the pilot lights corre- sponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.
Display
PREWASH/ PRELAVADO/
WASH LAVADO
RINSES ACLARADO
EXTRA ACLARADO RINSE
SPIN CENTRIFUGAR
END | FIN | |
OVER- | SOBRE DOSIF. | |
DOSAGE | ||
| ||
DOOR | PUERTA |
The time to the end of the programme decreases minute by minute and appears on the display.
66