|
| /I |
|
| 5 |
| RESET | 1 |
2 | 3 | 4 ■� |
1 OPEN/CLOSE |
|
|
deck operations | 2 |
|
Cassette | DOLBY NR | |
| ||
|
| NR |
| 3 | REV MODE |
|
| NR |
4
NR
5 VOLUME
DOWN UP
A
RESET
NR
14
RQT5296
Cassette tapes
Preparation: Turn the unit on.
1 Press [ 
OPEN/CLOSE], insert the cassette with the tape facing in.
Make sure the cassette is fully inserted and press [ 
OPEN/CLOSE] to close the deck.
2 Press [DOLBY NR] to select Dolby NR
on (“ 
NR” appears) or off.
3 Press [REV MODE] to select the reverse mode.
Every time the button is pressed:
: One side is played.
: Both sides are played.
: Both sides are played eight times each.
4 Press [v] or [u].
Play begins and the indicator changes to green. u: to play the forward side (facing up).
v: to play the reverse side (facing down).
5 Adjust the volume.
To stop the tape
Press [■].
AResetting the tape counter
Press [RESET].
Cassette tape selection and care
The unit can correctly play the following types. It identifies the type automatically.
Normal position/TYPE 1 | ✔ |
High position/TYPE 2 | ✔ |
Metal position/TYPE 4 | ✔ |
●Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism.
●Tape slack can get caught up in the mechanism and should be taken up before the tape is played.
●Endless tapes can get caught up in the deck’s moving parts if used incorrectly. Use tapes appropriate to this unit’s
Dolby noise reduction
Dolby NR reduces “hissing” when playing tapes. It increases the high frequency region when recording and then reduces it in playback. Use the same system during playback and recording. This unit has Dolby B NR which reduces noise to a third. Prerecorded cassettes and equipment marked “ 
” use Dolby B NR.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the 
are trademarks of Dolby Laboratories Licensing Corporation.