Technics SC-HD310, SC-HD510 One touch CD editing AI Edit, Press AI Edit, Recording CDs, Linking

Page 21

 

■�

AI EDIT

1 2

 

■�

A

 

AI EDIT

B

1 OPEN/CLOSE

2

Recording CDs

AOne touch CD editing (AI EDIT)

The unit calculates the length of the tape and decides which tracks go on which side of the cassette so tracks are not cut off midway.

Preparation: Do the preparatory steps (a page 19).

Insert a CD.

Press [AI EDIT].

The unit makes the calculations and “AI EDIT TAPE” scrolls across the display. It takes a moment for recording to start.

After the deck completes recording the CD

It goes into recording standby mode. If there is space left on the tape, “LINK” and the remaining time on the tape flash on the display.

●If you have completed recording, press [■] on the deck or the CD player.

●If you wish to continue recording with another CD, see “Linking” below.

To stop editing

Press [■] on the deck or the CD player.

“EDIT OUT” is displayed and both sections stop.

When tracks are allotted to both sides

When the tracks allotted to side A finish playing, the deck records to the end of the side to complete calculation.

Editing programmed tracks

Program the tracks (a step 1 and 2, page 18) and press [AI EDIT].

Note

Track numbered 25 or over cannot be recorded by one touch editing. Use normal recording (a page 20).

 

 

 

 

 

 

 

operations

B

Linking

 

 

 

 

 

 

 

 

 

 

 

If “LINK” is flashing and you wish to continue recording from another

 

CD, do the following.

Recording

1

Press [ OPEN/CLOSE] to close the tray.

Press [

 

OPEN/CLOSE] and insert

 

 

another CD.

 

2

 

 

 

 

 

 

Press [u] on the CD player.

 

 

Recording begins again.

 

You can continue linking tracks as long as there is space on the tape. If you load a CD that has no tracks short enough to fit in the remaining space, linking cannot be done.

To cancel

Press [■] on the deck or the CD player. “EDIT OUT” scrolls across the display.

Linking programmed tracks

Program tracks after inserting the new CD (a step 1 and 2, page 18).

Your attention is drawn to the fact that recording pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws.

21

RQT5296

Page 20 Page 22
Image 21
Page 20 Page 22
Contents SC-HD310 System SC-HD510 SC-HD310 RS-HDA710RAK-HDA26WH RAK-HDA25WH Table of contents Safety precautions How to replace the fuse Before useEB area code model only Installation Remote controlBatteries UseSpeaker Amplifier ConnectionsBasic connections for supplied accessories Connections Optional antenna connectionsExternal unit connections FM outdoor antennaCD player Front panel controlsCassette deck TunerTurning the Demo function off Remote controlAmplifier Front panel controlsSaving power in standby mode Setting the timeQPress /I to turn the unit on Press Mode Clock Play RECPress Tune Mode to select Manual Radio manual tuningAdjust the volume Press FM or AM to select the bandHold down SET Radio preset tuningPress Tuner Press the numbered buttons to select the channelCassette tapes Press TPS or TPS while the tape is stopped Press TPS Skip to selectCassette tapes CDs Press u to start play Adjust the volumeNormal play Press OPEN/CLOSE to open the traySelect the track with the numbered buttons Other modes of playPress Random Press Repeat before or during playProgram play Press sBefore recording Press REV Mode to select Reverse modePreparatory steps Press OPEN/CLOSE, insert Cassette with the tape facingRecording the radio Recording CDsNormal recording Press AI Edit One touch CD editing AI EditRecording CDs LinkingPlay timer Using the timersQPress CLOCK/TIMER, -DEMO to select Play Press /I to turn the unit offRecord timer QPress CLOCK/TIMER, -DEMO to select RECUsing the timers Sleep timer Play and record timersUsing the timers together Press Sleep to select the time minutesUsing headphones not included Using other equipmentListening to an external source Recording an external sourceConvenient functions MaintenanceTroubleshooting guide Technical specifications DIN 45
Top Page Image Contents