AEG 60820 manual Spin Speed, Display

Page 13

 

 

 

 

132996510.qxd 11/07/01 15.30 Pagina 57

(Nero/Process Black pellicola)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description of the appliance

By depressing at the same time buttons PRÉ-LAVAGEM and TRATAMEN- TO DAS NÓDOAS the acoustic signal at the end of programme is switched off.

SPIN SPEED

Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme or to select option STOP-NÃO ESGOTA (RINSE HOLD).

850

700

600

400

STOP-NÃO ESGOTA

1200

1000

900

700

400

STOP-NÃO ESGOTA

RINSE HOLD (STOP-NÃO ESGOTA)

By selecting this option, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the pilot light FIM (END) on the programme progress display illuminates to indicate that the water must be emptied out.

To empty out water:

press the START/PAUSE button: after emptying, the machine performs the spin cycle required for the type of wash selected;

select the DRAIN programme DESCARGA to empty out the water with- out spinning.

Warning! The programme selector dial must be turned first to RESET O and then to the DRAIN programme.

If the water is not emptied out, the machine automatically empties itself after 18 hours.

Display

The display shows the following information:

Duration of the selected programme (in minutes), calculated automat- ically on the basis of the maximum recommended load for each type of fabric.

When the programme has finished, a steadily lit zero is displayed.

Delayed start, (19 hours max.) programmed using the special button. The countdown is updated every hour.

Alarm code indicating a fault in the machine operation (see page 75).

57

Image 13
Contents Lavamat L Lavamat Triathlon Dear customer Contents Programme charts wash and special programmes General safety Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washing machine Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button ARRANQUE/PAUSA Delay Start button Arranque DiferidoStain Tratamento DAS Nódoas Programme Option buttonsDisplay Spin SpeedProgramme progress display Altering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerQuantity must not exceed the MAX mark in the drawer Sorting out and preparing the laundry Preparing the wash cycleSort of laundry Approximate Dry weights Weight of laundryTypes of fabric and care labels CottonDelicates Detergents and additives Load the laundry How to washAdd detergent and additives Select the desired options Select the desired wash programmeSelect the spin speed or Rinse Hold option STOP-NÃO Esgota Selection of the Extra Rinse option Select the Delay Start optionAt the end of the programme Starting the programmeHow to wash Programme chart Descrip Special programmesMax Consumption Tion Periodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerDrain filter Door sealWater inlet filter Emergency emptying out Frost precautionsProblem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemDistributed Problem Possible causeIf grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationLevelling PositioningWater inlet Electrical connection Water drainageDirectly into a Connect the machine to an earthed socketPermanent connection Qxd 11/07/01 15.30 Pagina