AEG 60820 manual How to wash

Page 25

 

 

 

 

132996510.qxd 11/07/01 15.30 Pagina 69

(Nero/Process Black pellicola)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

How to wash

If the light SOBREDOSAGEM (OVERDOSAGE) comes on it indicates that too much detergent has been used. At the next wash carefully follow the detergent manufacturer’s instructions. Measure out detergent according to amount, type, degree of soil of fabrics and water hardness.

This light could come on also when the drain filter is blocked.

If the RINSE HOLD option STOP-NÃO ESGOTA has been selected, the water must be emptied out before opening the door either

-by pressing the START/PAUSE button (the laundry will be spun at the speed corresponding to the selected type of fabrics. The spin speed can be reduced by means of the SPIN SPEED button)

-or by turning the selector dial to O and then to DRAIN (DESCARGA) and pressing the START/PAUSE button again. In this case the water will be emptied, but the laundry is not spun.

Turn the selector dial to O. Remove the laundry from the drum.

Check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.

Close the water tap.

Leave the door open to prevent the formation of mildew and unpleas- ant smells.

69

Image 25
Contents Lavamat L Lavamat Triathlon Dear customer Contents Programme charts wash and special programmes General safety Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washing machine Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button ARRANQUE/PAUSA Delay Start button Arranque DiferidoStain Tratamento DAS Nódoas Programme Option buttonsDisplay Spin SpeedProgramme progress display Altering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerQuantity must not exceed the MAX mark in the drawer Sorting out and preparing the laundry Preparing the wash cycleSort of laundry Approximate Dry weights Weight of laundryTypes of fabric and care labels CottonDelicates Detergents and additives Load the laundry How to washAdd detergent and additives Select the desired options Select the desired wash programme Select the spin speed or Rinse Hold option STOP-NÃO Esgota Selection of the Extra Rinse option Select the Delay Start optionAt the end of the programme Starting the programmeHow to wash Programme chart Descrip Special programmesMax Consumption Tion Periodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerDrain filter Door sealWater inlet filter Emergency emptying out Frost precautionsProblem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemDistributed Problem Possible causeIf grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationLevelling PositioningWater inlet Electrical connection Water drainageDirectly into a Connect the machine to an earthed socketPermanent connection Qxd 11/07/01 15.30 Pagina