AEG 60820 manual Instructions for installation and electrical connection

Page 37

 

 

 

 

132996510.qxd 11/07/01 15.30 Pagina 81

(Nero/Process Black pellicola)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Instructions for installation and electrical connection

Safety instructions for the installer

This appliance is heavy, care should be taken when moving it.

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

All internal packing must be removed before using the appliance. Seri- ous damage may be caused to the machine or adjacent furniture if the protective transit devices are not completely removed. Refer to the rel- evant paragraph.

Any electrical work required to install this appliance must be carried out by a qualified electrician.

Any plumbing work required to install this appliance must be carried out by a qualified plumber.

After having installed the machine, check that it is not standing on its electrical supply cable.

If the appliance is placed on a carpeted floor, ensure that air can cir- culate freely between the adjustable feet and the floor.

The installation should comply with local water authority and building regulations requirements.

Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

81

Image 37
Contents Lavamat L Lavamat Triathlon Dear customer Contents Programme charts wash and special programmes General safety Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washing machine Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button ARRANQUE/PAUSA Delay Start button Arranque DiferidoStain Tratamento DAS Nódoas Programme Option buttonsDisplay Spin SpeedProgramme progress display Altering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerQuantity must not exceed the MAX mark in the drawer Sorting out and preparing the laundry Preparing the wash cycleSort of laundry Approximate Dry weights Weight of laundryTypes of fabric and care labels CottonDelicates Detergents and additives Load the laundry How to washAdd detergent and additives Select the desired options Select the desired wash programmeSelect the spin speed or Rinse Hold option STOP-NÃO Esgota Selection of the Extra Rinse option Select the Delay Start optionAt the end of the programme Starting the programmeHow to wash Programme chart Descrip Special programmesMax Consumption Tion Periodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerDrain filter Door sealWater inlet filter Emergency emptying out Frost precautionsProblem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemDistributed Problem Possible cause If grey stains remain on the laundry Unsatisfactory washing results Foam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationLevelling PositioningWater inlet Electrical connection Water drainageDirectly into a Connect the machine to an earthed socketPermanent connection Qxd 11/07/01 15.30 Pagina