AEG 60820 manual Something not working?, Troubleshooting, Problem Possible cause Solution

Page 31

				132996510.qxd 11/07/01 15.30 Pagina 75	(Nero/Process Black pellicola)

Something not working?

If during the spin cycle the machine makes an unusual whistling noise, different from the noise made by tradi- tional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instruc- tions below.

If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the call-out will be charged even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

-E10: problem with the water supply (phase light ENXAGUAM. SUPLEMENTAR is on)

-E20: problem with water draining (phase light ENXAGUAM. is on)

-E40: door open (phase light LAVAGEM is on)

Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, contact your local AEG Service Force Centre.

Problem	Possible cause	Solution


	The main electrical fuse	Replace the fuse.
	has blown.
	The door is not properly	Close the door; the click
	closed (E40).	of the lock should be heard.
The machine does not work	The plug is not connected.	Insert the plug.
	The START button has not	Press the button.
	been pressed.
	The DELAY START	Check the selected delay on
	option has been selected.	the display.

75

Image 31

Contents Lavamat L Lavamat Triathlon Dear customer Contents Programme charts wash and special programmes Follow the instructions for positioning and connection Safety instructionsGeneral safety Positioning, connection, starting upProper use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washing machine Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button ARRANQUE/PAUSA Delay Start button Arranque DiferidoStain Tratamento DAS Nódoas Programme Option buttonsDisplay Spin SpeedProgramme progress display Altering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerQuantity must not exceed the MAX mark in the drawer Sorting out and preparing the laundry Preparing the wash cycleCotton Weight of laundrySort of laundry Approximate Dry weights Types of fabric and care labelsDelicates Detergents and additives Load the laundry How to washAdd detergent and additives Select the desired options Select the desired wash programmeSelect the spin speed or Rinse Hold option STOP-NÃO Esgota Selection of the Extra Rinse option Select the Delay Start optionAt the end of the programme Starting the programmeHow to wash Programme chart Descrip Special programmesMax Consumption Tion Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washDrain filter Door sealWater inlet filter Emergency emptying out Frost precautionsProblem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemDistributed Problem Possible causeWhite residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionRear view Dimensions of the applianceUnpacking InstallationLevelling PositioningWater inlet Connect the machine to an earthed socket Water drainageElectrical connection Directly into aPermanent connection Qxd 11/07/01 15.30 Pagina