AEG 60820 manual Positioning, Levelling, Water inlet

Page 40

				132996510.qxd 11/07/01 15.30 Pagina 84	(Nero/Process Black pellicola)

Installation

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by car- pets, rugs etc.

•Before placing it on small tiles, apply a rubber coating.

•Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.

•If it is impossible to avoid positioning the machine next to a gas cook- er or coal-burning stove, an insulating panel (85x57 cm) covered with aluminium foil on the side facing the cooker or stove, must be insert- ed between the two appliances;

•The machine must not be installed in rooms where the temperature can drop below 0.

•The water inlet hose and the drain hose must not be kinked.

•Please ensure that when the appliance is installed, it is easily accessi- ble for the engineer in the event of a breakdown.

Levelling

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Water inlet

Connect the water

inlet hose to a separate tap with

a 3/4" thread.

The other end of the inlet hose

which connects to the machine can be

turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks.

The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose spe- cially designed for this type of use.

84

Image 40

Contents Lavamat L Lavamat Triathlon Dear customer Contents Programme charts wash and special programmes Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connectionChild safety Proper useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washing machine Description of the appliance Front viewControl panel Programme selector dialDelay Start button Arranque Diferido START/PAUSE button ARRANQUE/PAUSAProgramme Option buttons Stain Tratamento DAS NódoasSpin Speed DisplayProgramme progress display Altering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerQuantity must not exceed the MAX mark in the drawer Preparing the wash cycle Sorting out and preparing the laundryWeight of laundry Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonDelicates Detergents and additives Load the laundry How to washAdd detergent and additives Select the desired options Select the desired wash programmeSelect the spin speed or Rinse Hold option STOP-NÃO Esgota Select the Delay Start option Selection of the Extra Rinse optionStarting the programme At the end of the programmeHow to wash Programme chart Descrip Special programmesMax Consumption Tion Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawerDrain filter Door sealWater inlet filter Frost precautions Emergency emptying outProblem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause SolutionProblem Possible cause DistributedUnsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Rear viewInstallation UnpackingLevelling PositioningWater inlet Water drainage Electrical connectionDirectly into a Connect the machine to an earthed socketPermanent connection Qxd 11/07/01 15.30 Pagina