AEG 62600 Safety instructions, General safety, Installation, connection and initial operation

Page 5

1 Safety instructions

The safety standards of AEG electric appliances are in keeping with the recognised rules of technology and the law governing the safety of appliances. Nevertheless as a manufacturer we are committed to famil- iarise you with the following safety instructions:

General safety

•Repairs to the washing machine may only be carried out by qualified personnel. As a result of incorrect repairs considerable dangers for the user may result. Please contact our customer service department or an authorised AEG dealer in the event of repairs being necessary.

•Never start the washing machine if the mains flex is damaged or the control panel, work top or base area are so damaged that the inside of the washing machine is accessible.

•Switch off the washing machine before carrying out any cleaning, care and maintenance work! You can make totally sure by pulling the mains plug out of the socket or - if permanently connected – by switching off the fuse switch in the fuse box or by unscrewing the plug fuse right out.

•Multiway plugs, joints and extension cables must not be used. There is risk of overheating!

•Never use the flex to pull the plug out of the socket but pull the actual plug.

•Do not spray the washing machine with a water jet – danger of an electric shock!

•During washing programs at a high temperature, the glass of the door heats up. Do not touch!

•Allow the suds to cool down before cleaning the pump or carrying out emergency emptying.

•Small animals can nibble at power cables and water hoses. Electric shock hazard and danger of damages from water!

Installation, connection and initial operation

•Please follow the separate Installation and connection instructions.

•Run the first washing cycle without washing ( /Cottons 95, with half the amount of washing powder) to remove residues on the drum and suds container caused during production.

•If the machine is delivered during the winter at freezing tempera- tures: store the washing machine for 24 hours at room temperature before starting it.

5

Image 5

Contents ÖKO-LAVAMAT Please read these operating instructions through carefully Dear customerContents Contents Installation, connection and initial operation Safety instructionsGeneral safety Intended use Safety of childrenEnvironmental tips DisposalDispose of the packaging Dispose of your old washing machineAll-round water protection Most important features of your applianceFront view Structure of the appliancePrewash Control panelProgram selector Program selector as program progress display Temperature selectorType of washing buttons Delay Timer buttonFinal spin speed/ Rinse Hold button ON/OFF buttonCompartment for washing powder and fabric softener Consumption values and time required for selected programs Before using your machine for the first timeProgram LoadSorting out and preparing washing Preparing the washing cycleWashing Types and Care Symbols Specifications of water hardness Using a water softenerHow much washing powder and fabric softener? Liquid detergentBrief instructions Run wash cycleWashing cycle consists of the following steps After the washing program has finishedFilling in the washing PRE Wash Adding washing powder/fabric softenerSet washing program Setting the washing programSet temperature Check if the tap is open Switch on the washing machine press To stop the washing program prematurely During the washing programWashing cycle finished/Removing the washing Program tables Care SymbolWashing Max. Load Program10-litre bucket contains about 2.5kg of dry washing cotton SelectorWashing Separate SoakingType Type of Washing Separate RinsingDetergent compartment Cleaning and caringDaily use Door Precautionary measures in the event of a risk of frostWashing machine drum Malfunction Possible cause Remedy TroubleshootingRemedy Feet are not correctly set Tion instruction Malfunction Possible cause If there are still grey stains on the washing If the washing results are not satisfactoryIf after the final rinse foam is still visible If there are white residues on the washingExecuting an emergency emptying When the suds have drained out completely Cleaning the suds pumpAdditional Rinse/Water Cooling Making the AdjustmentPosition 1 Water Cooling Position 2 Water Cooling and Additional RinsePower supply Technical dataInformation for the electrician This appliance complies with the following EC directivesAbort the program Conditioners IndexWhen do you incur costs even during the warranty period? Service