AEG 62600 Program selector as program progress display, Temperature selector

Page 11

Structure of the appliance

(RINSE)

Separate rinse, e. g. for rinsing fabrics washed by hand (spin according to the type of washing).

(CONDITIONER)

Separate fabric softening, separate starching, separate impregnating (one rinse runs, liquid conditioner from the compartment À is added).

(SPIN)

Spin after a (Rinse hold), or separate spinning of hand- washed fabrics.

(SOAKING)

Separate soaking (maximum 40°C), the washing stays in the suds at the end (not selectable for Woollens setting).

3 After soaking the main washing cycle required must be set, the pro- gram does not continue automatically.

(PUMP OUT)

Pumping out the water after a /Rinse hold (without spin).

Program selector as program progress display

The program selector serves as a program progress display by turning clockwise to the end of the program. For the programs Stain, Main wash and Quick wash, the program selector moves to a position directly behind Quick wash immediately after the program starts. Then it dis- plays the program progress as usual.

Temperature selector

The following temperatures can be set on the temperature selector:

(Cold), 30, 40, 50, 60, E, 70, 80, 95

2 Position E (energy saving program) is suitable for slightly to normally soiled linen; reduced temperature to approx. 67 °C.

11

Image 11

Contents ÖKO-LAVAMAT Please read these operating instructions through carefully Dear customerContents Contents Installation, connection and initial operation Safety instructionsGeneral safety Intended use Safety of childrenDispose of your old washing machine DisposalEnvironmental tips Dispose of the packagingAll-round water protection Most important features of your applianceFront view Structure of the appliancePrewash Control panelProgram selector Program selector as program progress display Temperature selectorON/OFF button Delay Timer buttonType of washing buttons Final spin speed/ Rinse Hold buttonCompartment for washing powder and fabric softener Load Before using your machine for the first timeConsumption values and time required for selected programs ProgramSorting out and preparing washing Preparing the washing cycleWashing Types and Care Symbols Liquid detergent Using a water softenerSpecifications of water hardness How much washing powder and fabric softener?After the washing program has finished Run wash cycleBrief instructions Washing cycle consists of the following stepsFilling in the washing PRE Wash Adding washing powder/fabric softenerSet washing program Setting the washing programSet temperature Check if the tap is open Switch on the washing machine press To stop the washing program prematurely During the washing programWashing cycle finished/Removing the washing Max. Load Program Care SymbolProgram tables Washing10-litre bucket contains about 2.5kg of dry washing cotton SelectorWashing Separate SoakingType Type of Washing Separate RinsingDetergent compartment Cleaning and caringDaily use Door Precautionary measures in the event of a risk of frostWashing machine drum Malfunction Possible cause Remedy TroubleshootingRemedy Feet are not correctly set Tion instruction Malfunction Possible cause If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the final rinse foam is still visibleExecuting an emergency emptying When the suds have drained out completely Cleaning the suds pumpPosition 2 Water Cooling and Additional Rinse Making the AdjustmentAdditional Rinse/Water Cooling Position 1 Water CoolingThis appliance complies with the following EC directives Technical dataPower supply Information for the electricianAbort the program Conditioners IndexWhen do you incur costs even during the warranty period? Service