AEG 1046 EL, 1246 EL manual Starting the programme, Programme progress display

Page 24

132986190.qxd 16/02/2005 11:56 Pagina 24

How to wash

Starting the programme

1. Check that the water tap is open.

2. Press START/PAUSE to start the programme. If the Delay Start option has been selected the programme will start at the end of the count- down.

If the DOOR light	is red and flashing for some seconds and when
it goes out the END	light starts flashing, the alarm code E40

appears in the display, it indicates that the door is open. Close the door and press the START/PAUSE button again.

If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to cancel the delay time.

•Load other laundry: press the START/PAUSE button. Open the door. Load the laundry. Close the door and press the START/PAUSE button again.

•Cancel the delay time: press the START/PAUSE button. Press the DELAY START button until 0’ appears on the display. Press the START/ PAUSE button again.

Programme progress display

By selecting the wash programme, the pilot lights corre- sponding to the various phases making up the pro- gramme come on. After the machine has started, only the running phase pilot light stays on.

Display

The time to the end of the programme decreases minute by minute and appears on the display.

24

Image 24

Contents Washing Machine Instruction Booklet Dear customer Contents Programme charts wash and special programmes Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connectionChild safety Proper useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washing machine Description of the appliance Front viewControl panel Programme selector dialDelay Start button START/PAUSE buttonProgramme Option buttons PrewashDisplay 1046EL 1246ELProgramme progress display Cancelling a programme Altering a programme which is runningOpening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryWeight of laundry Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonDelicates Detergents and additives How to wash Load the laundryAdd detergent and additive Selection of the desired options Selection of the spin speed or Rinse Hold option1046 EL 1246 EL Selection of the Delay Start option Selection of the Extra Rinse optionBefore starting Starting the programme At the end of the programme Programme chart Wash programmesSpecial programmes DescripMax Consumption Tion Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawerDoor seal Drain pumpWater inlet filter Frost precautions Emergency emptying outTroubleshooting Problem Possible cause SolutionSomething not working? Problem Possible cause SolutionProblem Possible cause DistributedUnsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Front view and side viewRear view Installation UnpackingPositioning LevellingWater inlet Water drainage Electrical connectionPermanent connection Connect the machine to an earthed socketQxd 16/02/2005 1156 Pagina From the Electrolux Group. The world’s No choice