AEG 1246 EL, 1046 EL manual Instructions for installation and electrical connection

Page 37

132986190.qxd 16/02/2005 11:56 Pagina 37

Instructions for installation and electrical connection

Safety instructions for the installer

•This appliance is heavy, care should be taken when moving it.

•When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

•All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not completely removed. Refer to the relevant paragraph.

•Any electrical work required to install this appliance must be carried out by a qualified electrician.

•Any plumbing work required to install this appliance must be carried out by a qualified plumber.

•After having installed the machine, check that it is not standing on its electrical supply cable.

•If the appliance is placed on a carpeted floor, ensure that air can cir- culate freely between the adjustable feet and the floor.

•The installation should comply with local water authority and build- ing regulations requirements.

•Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre.

37

Image 37

Contents Washing Machine Instruction Booklet Dear customer Contents Programme charts wash and special programmes General safety Safety instructionsPositioning, connection, starting up Follow the instructions for positioning and connectionProper use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washing machine Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonPrewash Programme Option buttons1046EL 1246EL DisplayProgramme progress display Altering a programme which is running Cancelling a programmeOpening the door after the programme has started Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSort of laundry Approximate Dry weights Weight of laundryTypes of fabric and care labels CottonDelicates Detergents and additives Load the laundry How to washAdd detergent and additive Selection of the spin speed or Rinse Hold option Selection of the desired options1046 EL 1246 EL Selection of the Extra Rinse option Selection of the Delay Start optionBefore starting Starting the programme At the end of the programme Wash programmes Programme chartDescrip Special programmesMax Consumption Tion Periodical cleaning Exterior Cleaning and maintenanceAfter each wash Detergent dispenser drawerDrain pump Door sealWater inlet filter Emergency emptying out Frost precautionsProblem Possible cause Solution TroubleshootingSomething not working? Possible cause Solution ProblemDistributed Problem Possible causeIf grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionFront view and side view Dimensions of the applianceRear view Unpacking InstallationLevelling PositioningWater inlet Electrical connection Water drainageConnect the machine to an earthed socket Permanent connectionQxd 16/02/2005 1156 Pagina From the Electrolux Group. The world’s No choice