AEG 1246 EL, 1046 EL manual START/PAUSE button, Delay Start button

Page 11

132986190.qxd 16/02/2005 11:56 Pagina 11

Description of the appliance

Position at 40°C = Easy to iron.

In this position the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier.

Position

= cold wash

Position

O = reset programme/switching off

START/PAUSE button

This button has two functions:

a)Start

After having selected the required programme, press this button to start the machine. If you have selected the DELAY START option , the machine starts its hourly countdown.

b)Pause

To interrupt a programme which is running, press the START/PAUSE button: the corresponding pilot light starts to flash.

To restart the programme from the point at which it was interrupted, press the START/PAUSE button again.

DELAY START button

The wash programme can be delayed from 30, 60, 90 minutes and then by 1 hour up to a maximum of 23 hours.

The button must be pressed after selecting the programme and before pressing the START/PAUSE button.

The figures indicating the delay appear for about 3 seconds in the dis- play. The duration of the selected wash programme is then displayed. After depressing the START/PAUSE button, the machine starts its hourly countdown.

To cancel the preset delay, press the START/PAUSE button, then press the DELAY START button until the symbol 0 ‘ is displayed.

Then press the START/PAUSE button again.

This function cannot be used with DRAIN , SPIN or DELICATE SPIN programmes.

11

Image 11
Contents Washing Machine Instruction Booklet Dear customer Contents Programme charts wash and special programmes Follow the instructions for positioning and connection Safety instructionsGeneral safety Positioning, connection, starting upProper use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washing machine Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonPrewash Programme Option buttons1046EL 1246EL DisplayProgramme progress display Opening the door after the programme has started Cancelling a programmeAltering a programme which is running Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleCotton Weight of laundrySort of laundry Approximate Dry weights Types of fabric and care labelsDelicates Detergents and additives Add detergent and additive How to washLoad the laundry 1046 EL 1246 EL Selection of the desired optionsSelection of the spin speed or Rinse Hold option Before starting Selection of the Delay Start optionSelection of the Extra Rinse option Starting the programme At the end of the programme Wash programmes Programme chartMax Consumption Tion Special programmesDescrip Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washWater inlet filter Door sealDrain pump Emergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Possible cause Solution Possible cause Solution ProblemDistributed Problem Possible causeWhite residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataService Safety instructions for the installer Instructions for installation and electrical connectionRear view Dimensions of the applianceFront view and side view Unpacking InstallationWater inlet PositioningLevelling Electrical connection Water drainageConnect the machine to an earthed socket Permanent connectionQxd 16/02/2005 1156 Pagina From the Electrolux Group. The world’s No choice