14Use
Select the spin speed or the rinse hold option
Press button 2 repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine.
The relevant light will light up.
The maximum spin speed for cotton programmes is: 1200 rpm
For the maximum speed allowed for each programme, please refer to the chapter «Washing Programmes».
Rinse Hold 
: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows a 0 flashing, the pilot light Door goes on, the Start/Pause light is off and the door is blocked to indicate that the water must be emptied out.
To empty the water out:
●turn the programme selector dial to O
●select the Drain or Spin programme
●reduce the spin speed if needed, by means of the relevant button
●depress button 7
●when the programme has finished the display shows a 0 flashing. The pilot light Door goes off and the door can be opened.
Programme option button
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing button
7.
When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the integrated yellow pilot light of button 7 flashes for 3 times and the Err message appears on the display for some seconds.
Important!
For the compatibility among the washing programmes and the options see chapter Washing Porgrammes.