AEG 2252 F user manual Water inlet filter, Emergency emptying out

Page 30

30Care and cleaning

Warning!

When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it.

Water inlet filter

If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked.

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff brush.

4. Screw the hose back onto the tap.

Emergency emptying out

If the water is not discharged, proceed as follows to empty out the machine:

1.pull out the plug from the power socket;

2.close the water tap;

3.if necessary, wait until the water has cooled down;

4.open the the pump door;

5.place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bowl. When the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out;

6.clean the pump if necessary as previously described;

7.replace the emergency emptying hose in its seat after having plugged it;

8.screw the pump again and close the door.

Image 30
Contents Lavamat Princess 2252 F Dear Customer Page Contents International wash code symbols Care and cleaning Packaging materials Old machine Ecological hints Safety information Prior to using for the first timeGeneral safety Installation UseChild Safety Keep all detergents in a safe place out of children’s reachProduct description Detergent dispenser drawerControl panel First UsePersonalization Acoustic signalsChild safety lock Daily UseDetergent required, pour it into the main Measure out the detergent and the fabric softenerSelect the required programme If required, pour fabric softener intoSelect the spin speed or the rinse hold option Programme option buttonTo empty the water out Select the Time Saving option Select the Prewash optionSelect the Stain option DisplaySelect the Start/Pause Programme progress displayAltering an option or a running programme Cancelling a programmeSelect an additional rinse Interrupting a programmeAt the end of the programme Washing programmes Spin reduction Pumpen VidangeRefresh Off Aus/ Arrêt White and fastProgramme information Easy IronSorting out the laundry TemperaturesPreparing the wash cycle Before loading the laundryLaundry weights Following weights are indicativeMaximum loads Removing stains Detergents and additivesPowder detergents for delicate fabrics 60C max and woollens Quantity of detergent to be usedDegrees of water hardness Marked before starting the wash programmeInternational wash code symbols Energetic wash Delicate washCare and cleaning Washing drum Door sealDrain pump Care and cleaning Water inlet filter Emergency emptying outFrost precautions Possible cause/Solution Something not workingSomething not working Cause possible/Solution Techinical Data Door includedConsumption value Installation UnpackingHEC0003 HEC0023 C Positioning and levelling Water inletConnect the hose with the angled connection to the machine End of the drain hose can be positioned in three ways Water-stop deviceWater drainage Drain hose must not be kinkedElectrical connection Permanent connectionConnect the machine to an earthed socket Old machine Enviroment concernsPackaging materials Ecological hintsChapter Repetition 132 966 340 -00-472007 Subject to change without notice