AEG 2252 F user manual Cause possible/Solution

Page 34

34Something not working

Problem

The door will not open:

The machine vibrates or is noisy:

Spinning starts late or the machine does not spin:

Cause possible/Solution

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

• Wait until the Door light has gone off.

There is water in the drum.

Select drain or spin programme to empty out the water.

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The support feet have not been adjusted

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume. If, after some minutes, the laundry is still not evenly distributed in the drum, the machine will not spin.

• Redistribute the laundry.

The machine makes an unusual noise:

No water is visible in the drum:

The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors. This new motor ensures a softer start and more even distribution of the laundry in the drum when spinning, as well as increased stability of the machine.

Machines based on modern technology operate very economically using very little water without affecting performance.

Image 34
Contents Lavamat Princess 2252 F Dear Customer Page Contents International wash code symbols Care and cleaning Packaging materials Old machine Ecological hints Prior to using for the first time Safety informationGeneral safety Installation UseChild Safety Keep all detergents in a safe place out of children’s reachProduct description Detergent dispenser drawerControl panel First UsePersonalization Acoustic signalsChild safety lock Daily UseDetergent required, pour it into the main Measure out the detergent and the fabric softenerSelect the required programme If required, pour fabric softener intoProgramme option button Select the spin speed or the rinse hold optionTo empty the water out Select the Time Saving option Select the Prewash optionSelect the Stain option DisplaySelect the Start/Pause Programme progress displayAltering an option or a running programme Cancelling a programmeSelect an additional rinse Interrupting a programmeAt the end of the programme Washing programmes Spin reduction Pumpen VidangeRefresh Off Aus/ Arrêt White and fastProgramme information Easy IronSorting out the laundry TemperaturesPreparing the wash cycle Before loading the laundryFollowing weights are indicative Laundry weightsMaximum loads Removing stains Detergents and additivesPowder detergents for delicate fabrics 60C max and woollens Quantity of detergent to be usedDegrees of water hardness Marked before starting the wash programmeInternational wash code symbols Energetic wash Delicate washCare and cleaning Door seal Washing drumDrain pump Care and cleaning Water inlet filter Emergency emptying outFrost precautions Possible cause/Solution Something not workingSomething not working Cause possible/Solution Techinical Data Door includedConsumption value Installation UnpackingHEC0003 HEC0023 C Water inlet Positioning and levellingConnect the hose with the angled connection to the machine End of the drain hose can be positioned in three ways Water-stop deviceWater drainage Drain hose must not be kinkedPermanent connection Electrical connectionConnect the machine to an earthed socket Old machine Enviroment concernsPackaging materials Ecological hintsChapter Repetition 132 966 340 -00-472007 Subject to change without notice