AEG 2252 F user manual Positioning and levelling, Water inlet

Page 39

Installation 39

Positioning and levelling

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc.

Before placing it on small tiles, apply a rubber coating.

Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.

If it is impossible to avoid positioning the machine next to a gas cooker or coal-burning stove, an insulating panel covered with aluminium foil on the side facing the cooker or stove, must be inserted between the two appliances.

The machine must not be installed in rooms where the temperature can drop below 0.

HEC007S

The water inlet hose and the drain hose must not be kinked.

Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Water inlet

An inlet hose is supplied and can be found inside the machine drum.

Do not use the already employed hoses to connect to the water supply. This appliance must be connected to a cold water supply.

1.Open the porthole and extract the inlet hose.

2.Connect the hose with the angled connection to the machine.

Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap.

HEC0006

Image 39

Contents Lavamat Princess 2252 F Dear Customer Page Contents International wash code symbols Care and cleaning Packaging materials Old machine Ecological hints Safety information Prior to using for the first timeGeneral safety Use InstallationKeep all detergents in a safe place out of children’s reach Child SafetyDetergent dispenser drawer Product descriptionFirst Use Control panelDaily Use Acoustic signalsChild safety lock PersonalizationIf required, pour fabric softener into Measure out the detergent and the fabric softenerSelect the required programme Detergent required, pour it into the mainSelect the spin speed or the rinse hold option Programme option buttonTo empty the water out Display Select the Prewash optionSelect the Stain option Select the Time Saving optionProgramme progress display Select the Start/PauseInterrupting a programme Cancelling a programmeSelect an additional rinse Altering an option or a running programmeAt the end of the programme Washing programmes Off Aus/ Arrêt White and fast Pumpen VidangeRefresh Spin reductionEasy Iron Programme informationBefore loading the laundry TemperaturesPreparing the wash cycle Sorting out the laundryLaundry weights Following weights are indicativeMaximum loads Detergents and additives Removing stainsMarked before starting the wash programme Quantity of detergent to be usedDegrees of water hardness Powder detergents for delicate fabrics 60C max and woollensEnergetic wash Delicate wash International wash code symbolsCare and cleaning Washing drum Door sealDrain pump Care and cleaning Emergency emptying out Water inlet filterFrost precautions Something not working Possible cause/SolutionSomething not working Cause possible/Solution Door included Techinical DataConsumption value Unpacking InstallationHEC0003 HEC0023 C Positioning and levelling Water inletConnect the hose with the angled connection to the machine Drain hose must not be kinked Water-stop deviceWater drainage End of the drain hose can be positioned in three waysElectrical connection Permanent connectionConnect the machine to an earthed socket Ecological hints Enviroment concernsPackaging materials Old machineChapter Repetition 132 966 340 -00-472007 Subject to change without notice