MAINTENANCE
Washing machine body and panel
Before performing any maintenance on your washing machine, be sure to remove the electrical plug from its power source.
The main body and control panel may be cleaned by wiping with a soft cloth soaked in water.
Caution: Never clean the body or control panel with benzine, thinner, cleanser, or other chemical cleaners. Use of suchchemicals can discolor or damage parts.
Cleaning the tub
“TUB CLEANING” course
The dirt from clothes or wastewater on the wash/spin basket will cause the smell or the problem of water draining. Such dirt from the washing process will then make the laundry dirty. If you are in such case, please use “Tub Cleaning” program once a month. Or in case the clothes have been starched, please use the “Tub Cleaning” program to remove the dirt of the starch from the basket.
•Normally use soap powder.
•The amount of detergent must be more than the guided Standard Detergent Amount.
•Do not use “Tub Cleaning” program continuously.
•If there is a great amount of dirt inside the basket, you had better use the
Please follow the instruction labeled on the cleaner bag.
L “Tub Cleaning” Process
Water Intake and spin | about 5 min |
Soaking | about 20 min |
Washing (Tub cleaning) | about 3 min |
Draining water and dry | about 4 min |
Water Intake and spin | about 5 min |
Rinsing | about 3 min |
Draining water and dry | about 1 min |
1Turn the POWER on.
2Press the COURSE button and select
TUB CLEANING.
3Press the START button.
•During the “Tub Cleaning” program, only the TUB CLEANING indicator will light on.
4When the pulsator (spinning board) starts to spin, add the
•Do not put any clothes in the basket during the “Tub Cleaning” program.
5Close the lid.
•If the lid is opened during the operation, the operation will stop before the draining and rinsing process.
Finish “Tub Cleaning” process.
•Beeping when the operation is finished.
13
13 | 12/12/06, 9:55 |