Toshiba AW-8570SM, AW-8570SS If the filling water becomes not good, Case of water may freeze

Page 17

INSTALLATION

If the filling water becomes not good

The water inlet may be blocked by foreign objects. Remove the water supply hose and clean the filter with a brush.

•If you remove the water supply care- lessly, water may splash. Therefore, use the following procedure.

Filter

Water intake valve

Removing the water supply hose

1Turn the water faucet off.

2Turn the power switch ON and press the START/HOLD pad.

3After indicating the water level, loosen the hose nut of the machine top and remove it.

In case of water may freeze

Drain all water from the basket, drainage hose and water supply hose after using the machine.

If the water is frozen

under 40°C

1Remove the water supply hose and pour in warm water (under 40°C).

2Fill warm water (under 40°C) into the basket until the pulsator is completely covered. Leave it for 30 minutes.Then check to see whether the pulsator can be turned by hand.

Installing the bottom cover

Put the bottom cover into the bottom of the washing machine, and fix the bottom cover with screws.

1Lay down the washing machine on a flat object such as a corrugated board so that the front side is down.

2Align the bottom cover with the taps of the hooks of the bottom cover left & right. (4 taps)

FRONT

FRONT

3 Fasten the screws on 6 positions.

BOTTOM COVER (LEFT)

BOTTOM COVER (RIGHT)

SUPPORT PLATE

*The service technician will mount the bottom cover when installing the unit.

17

Image 17

Contents AW-8570SS AW-8570SM ContentsNever disassemble or modify the machine Do not damage the electrical power cordNever use damaged electrical cords or plugs or loose socket Do not place flammable materials in the basketDo not use water with temperatures over 50C Do not pull the cord when unplug the applianceAccessories Description of PartsButton Setting Auto-Set ModeDescription and Operation of Panel Parts If you wish to turn off the end buzzer soundTo SET/RESET Child Proof Mode Child Proof modeWhen the Washer is Beeping and Starts Draining Water To PUT Additional LAUNDRY/ DetergentRegular Soak Speed Heavy Delicate HOW to OperateWashing of Blanket Super Spin DRY Overflow Rinse cycle Custom Wash CyclesHow to use preset mode Preset ModeTo SET/RESET Preset Mode To Confirm Preset TimeWhen using softener When using liquid detergent and bleachLaundry Guide Recommended detergent amountLint collector MaintenanceSoftener case Detergent caseTUB Cleaning course Cleaning the tubTub Cleaning Process Washing machine body and panelChoosing an installation location InstallationInstallation Installing the ground pinDrainage hose extension Installing the drainage hoseMoving the hook Attaching the water supply hose to the faucet Connecting the water supply hoseFaucet shape Attaching the hose unionIf the filling water becomes not good Installing the bottom coverCase of water may freeze Removing the water supply hoseWhen Check Treatment Before Calling the ServicemanHandling Method for Emergency SpecificationsFollowing are not malfunctions When Check 6248085701