Schumacher PID-200 owner manual Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

Save These Instructions

Before using your PID-200, read and understand this Owner’s Manual.

Keep the inverter well ventilated in order to properly dis- perse heat generated while it is in use. Make sure there are several inches of clearance around the top and sides and do not block the slots of the inverter.

Make sure the inverter is not close to any potential source of flammable fumes, gases or clothing.

Keep the inverter dry.

DO NOT allow the inverter to come into contact with rain or moisture.

DO NOT operate the inverter if you, the inverter, the device being operated or any other surfaces that may come in contact with any power source are wet. Water and many other liquids can conduct electricity, which may lead to serious injury.

Do not place the inverter on or near heating vents, radia- tors or other sources of heat.

Do not place the inverter in direct sunlight. The ideal air temperature for operation is between 50° and 80°F.

Do not use the inverter near an open engine compart- ment.

2

Image 2
Contents Includes 12 Volt Accessory Plug with 36 Cable and USB Port Important Safety Instructions Before Using PID-200 power Inverter Wash hands after handlingHow to use the 12 Volt Accessory Plug Operating InstructionsHow to use the USB Port Power SourceUsage Examples Device Type Estimated WattageDigital display Troubleshooting Power consumed by load may be too high Device demands more than 200 Watts continuous powerProblem Inverter Does Not Turn On Inverter is too hotProblem Keeps Blowing Fuses SpecificationsLimited Warranty
Related manuals
Manual 24 pages 63.78 Kb