Problem: Keeps Blowing Fuses
Reason/Solution
1.Fuse may be rated too low.
2.Check auxiliary socket for debris or short.
3.May be bad unit.
Try unit in another socket.
SPECIFICATIONS |
|
| |
Maximum Continuous Power | 200 Watts | ||
Surge Capacity (Output Wattage) | 400 Watts | ||
No Load Current Draw | <.36 Amps | ||
Wave Form | Modified Sine Wave | ||
Input Voltage Range | 11 – 15.5V | DC | |
Low Battery Alarm | 10.7V – 11.3V | DC | |
Output Voltage | 110V – 125V AC | ||
Low Battery Shutdown | 10.2V – 10.8V | DC | |
High Battery Shutdown | 15.0V – 16.0V | DC | |
Optimum Efficiency | >90% max | ||
AC Outlets | One, 110V AC | ||
USB Port | One | ||
36" Cable with 12 Volt Accessory Plug. | .......................One | ||
Fuse | One, 25 Amp | ||
10