Smeg WDI16BA Interrupting or Changing the Drying Programme, END of Drying Programme

Page 25

GB

6.5 INTERRUPTING OR CHANGING THE DRYING PROGRAMME

1.To interrupt the dry ing programme, proceed as indicated in point 1 of paragraph 5.12 – Interrupting or chang- ing the washing programme. When the machine is paused, the dry ing time can be changed by pressing the select button ().

2.If you wish to stop the programme and remove the washing, y ou should f irst allow the appliance to cool. Set dry ing time to 20 minutes with the select button. Start the machine as indicated in the following point and re- mov e the washing at the end of the cycle.

6.6 END OF DRYING PROGRAMME

Same methods as indicated in paragraph 5.13 – End of programme.

6.7 PROGRAMME FINISHED BUZZER

Same methods as indicated in paragraph 5.14 – End of programme beeper.

25

Image 25

Contents Integrated Washer Dryer Contents NEW Washing System Sibility for uses other than those described above Safety WarningsAnce Prolonged inactiv ityUnpacking Installation InstructionsWater Supply Connection Additional Important Installation InstructionsElectrical Connection Drain ConnectionFitting the Furniture Doors Fitting the hinge components to the furniture door Use of the furniture door fixing templateFitting the plinth Recessing the applianceControl Panel Description of ControlsOpen door button ON-OFF and programme selection knob Select the drying programme Time remainingLED Error codesSpin speed End of cycle ENDTion for heating increases Detergent Tray Options enabled LEDsPreparing the Washing Washing InstructionsOpening the Door Adding Detergent and Additiv ES Loading the WashingDosing Liquid Detergents Dosing Powder DetergentsSCALE-REMOV ERS Options Modifying Starting Param EtersStarting the Washing Programme Turn the programmes knob to OFF to switch off the machineInterrupting or Changing the Washing Programme END of Programme END of Programme Beeper Drying Instructions General WASH+DRY Programmes WASH-ONLY Programmes5kg Example DRY-ONLY ProgrammeEND of Drying Programme Interrupting or Changing the Drying ProgrammeProgramme Finished Buzzer External Cleaning Cleaning and MaintenanceCleaning the Drum Cleaning the Door GasketCleaning the Water Inlet Filter Cleaning the Detergent TrayTroubleshooting Error Signals Programs Control Panel SymbolsSection Programme Guide KEY to Button Temperature