129530
Quick program does not allow turning the heater off.
Child protection
Operation of the dryer may be protected against accidental changes of programs or functions. The function is activated by pressing the START button. By pressing any key the sound alarm signals that child lock is on. Relevant symbol flashes, and the display reads CHILD LOCK ON.
If you want to set new drying program, or change additional settings, you must first remove the protection.
Switching the function off: - during drying:
If you want to interrupt the program or change settings, switch off the function temporarily by keeping the B button (MENU) pressed for 4 seconds. During this time the program can be stopped by pressing D button (see cf. Interruptions). Relevant symbol flashes on the display. The function is reactivated by pressing the D button (START).
In case you fail to change anything within 15 seconds, the protection is automatically reactivated. Even if you stop drying by opening the door
and child lock is temporarily switched off, it is automatically restarted if the door is closed within the next 15 seconds.
If you switch off the protection in the menu during the interruption, it will no longer be active when the program continues.
- after drying is completed:
By pressing the B button (MENU) for four seconds after the drying program is completed, the protection is switched off permanently. This means that it will remain inactive also the next time you start the drying procedure. Otherwise the protection remains active till the next drying process. It is switched off by a four second pressing of B button (MENU), while the A button is turned to position “0”,
14