Installation and connection
Removing wrapping
Selecting the appropriate location of the appliance
Installation
•Packaging materials are environmentally friendly: they can either be recycled, safely disposed of or destroyed without any threat to the environment.
•To be able to do this effectively all materials are marked accordingly.
Be careful not to damage cabinet of the appliance with a sharp object when removing the packaging.
Ventilation slots and openings on the appliance front and rear wall should not be obstructed.
A - Evacuation dryer
•Place the appliance in a well ventilated room with a window or a
•Connect the evacuation tube to the
•Evacuation must not be connected to air duct used as a chimney for exhaust gasses of appliances using other combustion material.
B - Condenser dryer
• Do not place the appliance in a room where there
is danger of freezing. |
|
• Location should be adequately ventilated. Room |
|
temperature should always be between 0°C and |
|
25°C since frozen water in the condensation |
|
water receptacle or in the pump may damage the |
|
dryer. |
|
• Appliance can either stand on its own or can |
|
be placed on top of a washing machine of the |
|
same dimensions - minimum width 517 mm, |
|
depth 476 mm. The surface for placing the dryer |
|
must be clean and flat. Use supplied vacuum |
|
feet to prevent sliding of the appliance. Washing |
|
machine hardtop must be wooden or metallic. To |
|
conceal the opening between the two appliances, |
|
decorative plate is available on request against | 129530 |
payment. | |
7 |
|