Smeg DRY63CS manual Troubles

Page 24

Troubles

Interferences from the ambient (for example electrical wiring) could induce signalization of different faults. In such cases:

-switch the appliance off, and wait for a few seconds;

-switch the appliance back on and repeat the washing program.

If the fault repeats, call authorized service shop.

TroubleCheck

Appliance does not • If there is current in the socket and if the fuse is

work:functioning.

• If the plug is correctly inserted into the socket.

There is current in the socket, but the drum is not rolling:

If the door is closed tightly (press it towards the appliance).

If the program runs according to instructions.

If the container is full (only with condensation dryer).

If appropriate drying time is selected.

129530

 

Laundry is not dry:

If the filter is clean.

 

 

 

• If the condensation device is clean (only with

 

 

 

 

condensation dryer).

 

 

 

If the room is adequately ventilated.

 

 

 

If the amount of laundry to be dried is not too big.

 

 

 

If the evacuation tube is too long (only with

 

 

 

 

evacuation dryer - max 2 m).

 

 

 

• If the laundry loaded in the drum has not been

 

 

 

 

spun enough or if appropriate drying time has

 

 

 

 

been set.

 

 

 

If the room is too hot (over 25°C, applies for

 

 

 

 

condensation dryer).

 

The condensation is

• If the room temperature is too high.

 

inadequate:

If the condensation device is clean.

 

Unevenly dried

If the amount of laundry to be dried is not too big.

 

laundry:

If there are only large pieces of laundry (large and

 

 

 

 

small pieces should be dried together).

 

 

 

If different fabrics are dried together (group the

 

 

 

 

laundry according to the type of fabrics).

 

 

 

 

 

24

 

 

 

 

 

 

 

 

Image 24 Contents
Instructions for Use Tumble DryerTips for drying and for the economic Technical data Appliance description129530 To reduce the fire hazard, always consider the following 129530 Installation and connection Evacuation dryerCondenser dryer Moist air outlet Power connection Operation Function keysName of program, 2. Moisture level, 3. Additional functions Selecting language Selecting basic drying programsSelection of additional functions Delayed start Reduced temperatureAnti-crease program Heater offSwitching the function off during drying Child protectionSound signal audible warning Default settings, except for the sound signal Drying procedureChild lock Interruptions Power failure Door openedSpecial functions Drum emptyDrum lamp Display illumination Tips for drying and for the economic use of the dryer Cleaning and maintenance Cleaning the filter Cleaning the condensation dryerCleaning of evacuation Cleaning the waterDrier Condensation deviceReplacing the bulb Troubles 129530 Program chart TablesProgram chart / additional functions Time SET ProgramTable of textile symbols Drying129530 129530 Page SP PG3,4 OEM