Smeg DRY63CS manual Power connection

Page 9

The distance between the dryer and the moist air outlet (vent shaft, window) should not exceed 2 meters, otherwise water can accumulate in the tube.

B - Condenser dryer

Moisture from laundry is extracted in the water

 

condensation device and is either collected in the

 

receptacle or discharged directly into the drain

 

(drain height should not exceed 800mm).

 

Display reads CONTAINER FULL and a beep is

 

heard when the water receptacle is full and should

 

be emptied, preferably after each drying cycle.

 

Use the power cord to connect the dryer to the

Power connection

 

power supply via wall socket.

 

Rated voltage and other characteristics are

 

indicated on the name plate, located under the

 

door frame of the appliance.

 

The wall socket should always be within

 

reach. It has to be earthed according to the

 

standing regulations.

 

If the supply cable is damaged it should

 

only be replaced by a qualified technician.

129530

9

Image 9
Contents Tumble Dryer Instructions for UseTips for drying and for the economic Appliance description Technical data129530 To reduce the fire hazard, always consider the following 129530 Installation and connection Evacuation dryerCondenser dryer Moist air outlet Power connection Function keys OperationName of program, 2. Moisture level, 3. Additional functions Selecting language Selecting basic drying programsSelection of additional functions Reduced temperature Delayed startAnti-crease program Heater offChild protection Switching the function off during dryingSound signal audible warning Default settings, except for the sound signal Drying procedureChild lock Interruptions Door opened Power failureDrum empty Special functionsDrum lamp Display illuminationTips for drying and for the economic use of the dryer Cleaning the filter Cleaning the condensation dryer Cleaning and maintenanceCleaning the water Cleaning of evacuationDrier Condensation deviceReplacing the bulb Troubles 129530 Tables Program chartTime SET Program Program chart / additional functionsDrying Table of textile symbols129530 129530 Page SP PG3,4 OEM