Cleaning and maintenance
Cleaning the filter
Cleaning the condensation dryer
•After every drying clean the filter, located in the inner part of the door.
•Lift the filter lid (Fig.).
•Pull your fingers over the filter to remove fibers and threads lining. Replace the filter cover (it must snap in place at the bottom).
•If necessary, also clean the filter housing and door sealing.
If the filter is clogged in such way that it needs washing, pull it out from its bed (Fig.), wash it under hot water and dry. Be sure that the replaced filter snaps safely to its position, and only then close the filter lid.
If the filter is not regularly cleaned, the airflow is obstructed, which causes longer drying time and danger of overheating.
Empty the container and occasionally clean the water condensation device.
Emptying the water containere
Empty the container after every drying procedure: pull the container out, pull out the draining nozzle, pour out the water and replace the container.
Water from condenser tank is not drinkable! If filtered it may be used for ironing.
129530
21