Signature Housewares SIG100-97 manual Trouble shooting answer to question

Trouble shooting answer to question

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself.

Phenomena	The reason		How to settle
After the "reserve" is started,			Close the top lid
it rings and the digital tube	The top lid is not closed
displays "E0"
The draining does not work,	Is the drain hose blocked by		Clean the foreign material. Open
or the speed of draining is
	foreign material?		and close the top lid once.
too slow. The digital tube
displays "E1" and it rings.
It stops running during wash,
rinse or spin. The digital tube	The top lid is not closed		Close the top lid
displays "E2" and it rings.
It does not do water inlet or	Is the water faucet open or is		Open the water faucet. Open
the speed is slow (the water	there water supply failure?		and close the top lid once.
level is not reached after 15
	Is the water inlet valve is		Clean the water inlet valve.Open
minutes). The digital tube
displays "E4" and it rings.	blocked		and close the top lid once.
The machine does not act.	Is there power failure?		Use it when the power is on.
(the indicators are off.)	Is the power plug loose?		Insert the power plug tightly.
	Is the machine slanting?		Level the machine properly.
There's abnormal sound	Is there metal material inside		Fasten the buttons and zipper
inside the machine.	the washing machine?		Re-order the laundries. Close the
	Are the laundries slanting in
			top lid.
	spinning?
	Is the jointer of the water inlet
The water faucet leaks.	hose is loose or twisted awry?		Fasten the jointer properly.
	If plug is inserted firmly?		Insert the plug firmly
No water filling	If tap is turned on?		Turn on the tap
	If Power On/Off and		Press Power On/Off and
	Start/Pause is pressed?		Start/Pause
The numeral tube shows	Overflow alarm		Please contact the after-sales
F2			service department.
Normal phenomena
Phenomena		Causes (explanations)
Intermittent spin after spin starts		Adjust balance to avoid clothes offset
Spin is selected, yet the machine doesn't spin		The program sets a drain time, spin starts
		after a time.
While water filling in wash and rinse, the		To prevent splash during water filling.
pulsator pauses rotation
Small amount of water flows out upon the		This is residual water during factory perfor
washing machine is initially used		mance test.
The machine stops when top cover is opened		This is a normal fact. Due to the drum rotation,
during running.		an open cover alarm function is provided for safety.

16