Signature Housewares SIG100-97 Installation and adjustment, Adjust the installation position

Page 6

Installation and adjustment

Adjust the installation position

The largest allowed slope of the base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods:

Confirm it's horizontal:

Adjust the adjustable foot:

Hang the lead line to confirm if it is horizontal.

To twist the adjustable foot, please first lift up the side of the foot slightly, and twist the foot.

.

Adjustable foot

High Low

Install the drain hose

Put the drain hose clamp on the outer drain hose, insert the outer drain hose into the joint, and then clutch tightly with drain hose clamp.

Drain hose Drain hose clamp

Drain hose joint

Usage of the drain hose

The drainage shall be smooth with the drain hose.

1.put the drain hose up to suitable position.

1.0m-1.5m

2.Do not step on or press the drain hose.

4

Image 6
Contents SIG100-97 Contents Accessories Meaning and description of the symbols Names of the partsSafety precautions EarthPetrol Installation and adjustment Adjust the installation positionInstall the water inlet hose Preparation before washing Pay attention to followings before washing the laundriesPut in the laundries Indicator mode and meaning Usage of the Operation Buttons Explanation of ButtonsNumeral tube s window Press Power On/Off to switch on the power supply On/Off Buttons initial status for Normal programPress the button of cycles to select a suitable Full-automatic programButtons, status for different program selected Press the button of Speed to select suitable wash Press the button of Load Size to select a suitableWater level Spin speedsPress the button of Delay/Start to select a suitable Delay Press the Start/Pause buttonClose the top lid Cleaning the lint filter After washingTrouble shooting answer to question Packing list Specification