Smeg WLB500T manual Filter

Page 15

Filter

Filter is located under the cap at the bottom of the machine.

If you use the machine correctly, there is no need to clean the filter.

You have to open and clean the filter when solid objects trap in it and obstruct the outlet. (The laundry is not rinsed enough, still wet, water is not pumped out of the machine).

Before cleaning the filter, mind to pump the water out of the machine. The best method to do that is to place the outlet hose as low as possible (near the floor).

17

18

Remove the cover (with coin inserted into the notch (fig. 17).

Insert the funnel attached to the machine into the bottom cut-outs between the filter cover and cabinet and fix it by turning clockwise.

Place a shallow pan underneath to allow the excess water to pour out. Remove the filter, by turning it counter-clockwise (35-40°) (fig. 18).

Replace the filter in the reverse order and screw it down firmly. Check it for sealing prior to washing.

Instructions for Use

65

Image 15
Contents Washing Washing MachineTips for Energy Savings Before UsePage Removing the Transport Brackets Maximum height of the washing machine is 850 mm Placing and InstallationConnection to the Water Supply Water OutletConnection to Power Supply DoorDirection of Opening the Door Degree of Soil Preparing the LaundryType of Fabrics Colour FastnessToo much washing powder causes Washing Agents and How Much to UseDispenser Fabric Conditioner and Starching AgentLiquid Washing Agents Programme Selection Knob Temperature Selection KnobWashing Control LightHalf Programme Switch Cold Wash SwitchON/OFF switch Extra Rinsing SwitchAfter Washing Prepare your machine for washingTable of Washing Programmes Cold Water Table of Washing Programmes Hot/cold WaterWater Cold Interior of the drum Cleaning and MaintenanceWire Net in the Inlet Hose HousingFilter Trouble Shooting Guide