Prepare your machine for washing
−Select laundry and load a suitable amount.
−Close the door (push it towards the machine).
−Fill the dispenser (in the correct sections).
−Check water inlet and outlet.
−Choose the right programme.
−If your machine is equipped with switches, use them, as appropriate.
−Select the washing temperature, if your washing machine is equipped with this option.
−Switch the machine on.
After Washing
−Switch off the machine (the control lamp turns off).
−Check that the washing is finished and that water is pumped out of the machine to avoid unnecessary flooding. If there is still water in the machine, select one of the programmes for pumping or spinning.
−Some two minutes after the washing is finished you can open the door.
−Take the laundry out of the machine and turn the drum once or twice with hand to make sure it is really empty.
−Check the rubber gasket on the door and remove objects that might have deposited (buttons, pins..) (fig. 14).
−Leave the door open and allow the interior to dry.
−Disengage any pushbuttons you used.
−Close the water tap.
−Check the dispenser and clean it if necessary and dry it well.
−Every now and then, check and clean the lint filter.
14 |
62 | Instructions for Use |