Smeg WLB500T manual Spinning-OFF Knob, Pump Stop Pushbutton, Cold Wash Switch, ON/OFF switch

Page 11

Spinning-OFF Knob

Switch the spinning-OFF knob, if you want either:

− to switch off the spin cycle on all the programmes for delicates and woolens; or

the programmes for delicates to rinse without spinning and with short end spin cycle (2 minutes).

Pump Stop Pushbutton

Use this switch for all programmes, except for programmes for woolens, if you want your laundry to remain in the last rinsing water.

When this pushbutton is off, the washing programme end with spin cycle.

Half programme switch may be used with all programmes for non-delicates. On programmes for delicates and woolens, this switch won't work.

Cold Wash - Switch

If you switch the cold wash switch, the heaters are off and all programmes are washing with cold water. The duration of the programme is the same as if the heaters were on.

ON/OFF switch

Select suitable washing programme, prepare the laundry for washing and press the ON/OFF switch to switch the machine on.

Extra Rinsing Switch

All washing programmes are designed for

the optimum use of water, during the washing as well as during the rinsing cycle.

Use the extra rinsing cycle if you are allergic to washing agents. The switch may be pressed either before washing or before rinsing.

Higher water level pushbutton

Washing under programmes for resistant

laundry (programmes A and B) is carried out with a low water level, the quantity of water is automatically adjusted to the amount of laundry. This guarantees successful and economic washing, regardless of the amount of laundry. When you are washing laundry that is heavily soiled or stained, press this pushbutton for a higher water level for the pre-wash and the main wash.

It is impossible to change the water level in programmes for delicate linens and woolens.

Half Programme Switch

If the amount of laundry you intend to wash is smaller, use the half programme (up to 2.5 kg).

This will help you save energy and water. Don't forget to use less washing powder as well.

Washing machine without temperature selection knob

Half programme switch may be used only with programmes for non-delicates (95°C).

If you use the half programme switch for other programmes, the washing temperature will be higher than marked for individual programme.

Washing machine with temperature selection knob

Instructions for Use

61

Image 11
Contents Washing Washing MachineTips for Energy Savings Before UsePage Removing the Transport Brackets Maximum height of the washing machine is 850 mm Placing and InstallationConnection to the Water Supply Water OutletDirection of Opening the Door Connection to Power SupplyDoor Degree of Soil Preparing the LaundryType of Fabrics Colour FastnessToo much washing powder causes Washing Agents and How Much to UseDispenser Fabric Conditioner and Starching AgentLiquid Washing Agents Programme Selection Knob Temperature Selection KnobWashing Control LightHalf Programme Switch Cold Wash SwitchON/OFF switch Extra Rinsing SwitchAfter Washing Prepare your machine for washingWater Cold Table of Washing Programmes Cold WaterTable of Washing Programmes Hot/cold Water Interior of the drum Cleaning and MaintenanceWire Net in the Inlet Hose HousingFilter Trouble Shooting Guide