The same programme can be received on different frequencies.
Programme 1
broadcasting
on frequency AProgramme 1 broadcasting
on frequency E
PTY Standby Reception
PTY When you press PTY while listening to an FM station, the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged. The selected PTY name stored on page 12 flashes for 5 seconds.
ENGLISH
Programme 1 broadcasting
on frequency B Programme 1 broadcasting on frequency C
Using Standby Reception
Programme 1 broadcasting on frequency D
•When the station being received is not a PTY station, the PTY indicator flashes. Press ¢ 
or 4 
to engage the PTY standby mode. “SEARCH” appears on the display, and PTY station search starts. When a PTY station is tuned into, the PTY indicator is lit.
7If you are listening to a tape or other connected components and wish to listen to a selected PTY broadcast, press PTY to enter the PTY standby mode. (The PTY indicator lights up.)
Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station, tape or other connected components).
•Standby Reception will not work if you are listening to an AM station.
TA Standby Reception
TP | When you press TP RDS while listening |
RDS | |
| to an FM station, the TP indicator is lit |
| during reception of a TP (Traffic |
| Programme) station and the TA standby |
| mode is engaged. |
•When the station being received is not a TP station, the TP indicator flashes. Press ¢ 
or 4 
to engage the TA standby mode. “SEARCH” appears on the display, and TP station search starts. When a TP station is tuned into, the TP indicator is lit.
7If you are listening to a tape or other connected components and wish to listen to a TP station, press TP RDS to enter the TA standby mode. (The TP indicator lights up.)
If a traffic programme starts broadcasting while the TA standby mode is active, “TRAFFIC” appears and the playback source changes to the FM band. The volume increases to the preset TA volume level (see page 14) and the traffic programme can be heard.
To deactivate the TA standby mode, press TP
RDS again.
If the selected PTY programme starts broadcasting while the PTY standby mode is active, the selected PTY name appears and the playback source changes to the FM band. The selected PTY programme can then be heard.
To deactivate the PTY standby mode, press PTY
again.
11