JVC Searching a station manually Manual search, KS-FX725RKS-F525, Button again

Searching a station manually: Manual search

1 Select the band (FM1 – 3, AM).

KS-FX725R

FM1 FM2 FM3 AM

KS-F525

FM1 FM2 FM3

AM

Note:

This receiver has three FM bands (FM1, FM2,

FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4 until “M (manual)” starts flashing on the display.

3 Tune in to a station you want while “M” is flashing.

Press ¢ to tune in to stations of higher frequencies.

Press 4 to tune in to stations of lower frequencies.

•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.

•If you hold down the button, the frequency keeps changing (in 50 kHz intervals (87.5 MHz – 108 MHz), in 30 KHz intervals (65 MHz – 74 MHz) for FM and 9 kHz intervals for AM – MW/LW) until you release the button.

When an FM stereo broadcast is hard to receive:

Press MO RND (for KS-FX725R) or MO (for KS- F525) while listening to an FM stereo broadcast.

•Each time you press the button, the MO indicator lights up and goes off alternately.

Lights up when receiving an FM broadcast in stereo.

MO

RND MO

ENGLISH

KS-FX725RKS-F525

Selected band appears.

When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).

To restore the stereo effect, press the same

button again.

7