ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
• See pages 20 and 21 for
details.
2 For KS-FX725R:
1Select “BAS (bass),” “TRE (treble),” or
“LOUD (loudness)”.
2 Adjust the bass or treble level or turn the loudness function ON/OFF.
1 2
For KS-F525:
To adjust the bass or treble level.
1Select “BAS” or “TRE”.
2Adjust the bass or treble level.
1 2
To turn on the loudness function.
Each time you press LOUD,
LOUD
loudness function turns on and off alternately.
3 Repeat step 2 to adjust the other items.
4 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
Your adjustment made for the
selected sound mode is stored in memory.
5 Repeat the same procedure to store other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 21.
22