JVC KS-F525 manual Scanning broadcast stations, Tune in to a station in this example, of 88.3 MHz

2 Tune in to a station (in this example, of 88.3 MHz).

Press ¢ to tune in to stations of higher frequencies.

Press 4 to tune in to stations of lower frequencies.

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 8 and 9.

1 Select the band (FM1 – 3, AM).

KS-FX725R

ENGLISH

FM1 FM2 FM3 AM

3	Press and hold the number button
	(in this example, 1) for more than 2
	seconds.	KS-F525
		FM1	FM2	FM3
		AM
4	“P 1” flashes for a few seconds.	2 Select the number (1 – 6) for the preset
	Repeat the above procedure to store	station you want.

other stations into other preset numbers.

Notes:

•A previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

Scanning broadcast stations

(only for KS-F525)

When you press SCAN while listening to the radio, station scanning starts.

SCAN	Each time a broadcast is tuned
	in, scanning stops for about 5
	seconds (tuned frequency
	number flashes on the display),
	and you can check what program
	is now being broadcast.

If you want to listen to that program, press the same button again to stop scanning.

9