EXTERNAL COMPONENT OPERATIONS
DISP
DAB
TP
RDS
PTY
7 | 8 | 9 | 10 | 11 | 12 | MO |
ENGLISH
This section is only for KS-FX725R.
Playing an external component
You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor
Preparations:
•For connecting the Line Input Adaptor
•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to use – EXT IN” on page 25.)
2 Turn on the connected component and start playing the source.
3 Adjust the volume.
4 Adjust the sound characteristics you want. (See page 19.)
1 Select the external component
•If “LINE IN”* does not appear on the display, see page 25 and select the external input (“LINE IN”).
*Displayed only when one of the following sources is selected — FM, AM and Tape.
Note on
When you press
comes on. You do not have to press to turn on the power.
29