Beko User's Manual WM 95135 LB WM 95145 LW Child Lock, Cancelling the programme, End of programme

Page 28
The loading door will not open if the water temperature in the machine is high or the water level is above the door opening.

Operating the product

4. Close the Loading Door.

5. Make changes in auxiliary functions, temperature and speed settings if necessary.

6. Press Start / Pause / Cancel button to start the machine.

C

5.17 Child Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes in a running programme.

C You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine again, programme will resume from where it has stopped.

To activate the Child Lock:

Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. “Con” appears on the display.

C Same phrase will appear on the display if you press any button when Child Lock is enabled.

To deactivate the Child Lock:

Press and hold 2nd and 4th Auxiliary Function buttons for 3 seconds. “COFF” appears on the display.

C Do not forget to disable the child lock at the end of the programme if it was enabled before. Otherwise, machine will not allow to select a new programme.

5.18 Cancelling the programme

Press and hold Start / Pause / Cancel button for 3 seconds. Start symbol flashes. Symbol of the step at which the programme was cancelled remains lit. "End" appears on the display and the programme is cancelled.

C If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to Pump+Spin programme and discharge the water in the machine.

5.19 Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol illuminates when the machine is in Rinse Hold mode.

If you want to spin your laundry when the machine is in this mode:

Adjust the spin speed and press Start / Pause / Cancel button. Pause symbol disappears and Start symbol appears. Programme resumes, discharges the water and spins the laundry.

If you only want to drain the water without spinning:

Just press Start / Pause / Cancel button. Pause symbol disappears. Start symbol appears. Programme resumes and discharges the water only.

5.20 End of programme

“End” appears on the display at the end of the programme. Symbols of the programme steps remain lit. Auxiliary function, spin speed and temperature that were selected at the beginning of the programme remain selected.

28 / 40 EN

Washing Machine /User’s Manual

 

 

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Washing Machine Dear Customer Explanation of symbols Important information or useful hints about usageImportant instructions for safety Environment4 InstallationMaintenance and cleaning TroubleshootingImportant instructions for safety and environment General safetyUnplug the product when not in use Service life of your product is 10 yearsPackage information Compliance with Weee DirectiveDisposing of the waste product This appliance’s packaging material isPower cable Your washing machineOverview Top panel Loading door Control panelYour washing machine Package Contents Your washing machine Technical specifications Total current a Total power W 2200 Spin speed rpm maxStand-by mode power W Off-mode power W Main model code Single Water inlet / Double Water inlet AvailableInstallation Appropriate installation locationRemoving packaging reinforcement Removing the transportation locksInstallation Connecting water supplyConnecting to the drain InletAdjusting the feet 11 / 40 ENFitting a different plug Installation Electrical connection12 / 40 EN 13 / 40 EN Sorting the laundry Preparation14 / 40 EN Preparation Preparing laundry for washing Initial useThings to be done for energy saving 15 / 40 ENPreparation Correct load capacity Using detergent and softenerLoading the laundry Adjusting detergent amount PreparationUse different detergents for coloured and white laundry 17 / 40 ENUsing starch Using bleachesDo not use softener and starch together in a washing cycle Do not use bleaching agent and detergent by mixing themPreparation Tips for efficient washing 19 / 40 ENDisplay symbols Operating the productControl panel On / Off buttonOperating the product Preparing the machine Programme selectionMain programmes Additional programmesOperating the product Special programmesTemperature selection Spin speed selection23 / 40 EN Use a lower spin speed for delicate laundriesProgramme and consumption table 24 / 40 ENOperating the product Auxiliary function selection PrewashExtra Rinse 25 / 40 ENDelayed start Changing the delayed start periodCancelling the Delayed Start function Time displayOperating the product Starting the programme Progress of programmeLoading door lock Changing the selections after programme has startedCancelling the programme Machine is in Rinse Hold modeChild Lock End of programmeQuick User Guide 29 / 40 ENCleaning the detergent drawer Cleaning the loading door and the drum30 / 40 EN MonthsMaintenance and cleaning Cleaning the water intake filtersCleaning the body and control panel Draining remaining water and cleaning the pump filterPull the emergency draining hose out from its seat Install the filter32 / 40 EN Troubleshooting 33 / 40 ENProgramme cannot be started or selected Machine does not fill with waterTroubleshooting 34 / 40 EN35 / 40 EN It does not rinse well36 / 40 EN Detergent residue in the detergent drawerWater pressure is low. Check the water pressure Foam is overflowing from the detergent drawerOn / Off button might not be pressed. Press On / Off button Loading door may be open. Close the loading door37 / 40 EN Machine does not start. Nothing appears on the displayComplying Commission Delegated Regulation EU No 1061/201 38 / 40 ENService Washing MachinesGuarantee Washing Machines, Dishwashers and Electric Cookers
Top Page Image Contents