Spin Speed selection

Cold selection is shown with “-” symbol. When the “Temperature” button is pressed after coming to the Cold selection, the maximum temperature of the program you have selected will be displayed.

To decrease the temperature, press the “Temperature” button again.

		Normally soiled, white
		cottons and linens. (Ex.:
	90˚C	coffee table covers,
		tablecloths, towels, bed
		sheets)
		Normally soiled, fade proof
		colored linens, cottons
		or synthetic clothes
	60˚C	(Ex.: shirts, nightgowns,
		pajamas) and lightly soiled
		white linen clothes (Ex.:
		underwear)
	40˚C	For delicate clothes (Ex.: veil
	40˚C	curtains), blended clothes
	30°C	curtains), blended clothes
	30°C	including synthetics and
	Cold	including synthetics and
	Cold	woolens.
		woolens.

Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator (Figure 3-2a).

To decrease the spin speed, press the “Spin” button (Figure 2-1). Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively.

Rinse hold is shown with “” and no

spin is shown with “ ” symbols. If you do not want to unload your clothes immediately after the program, you may use the rinse hold function in order to prevent your clothes become wrinkled in an anhydrous condition.

With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function:

-Adjust the spin speed.

-Press Start/Pause/Cancel Button. Program resumes. Your machines drains the water and spins your laundry.

You can use no spin function in order to drain the water without spinning at the end of the program.