Beko D2 7101E, D2 7102 ES, D2 7082 E manual General Safety, First Use, Intended use

Page 6

2Warnings

Please read the following information. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void.

General Safety

Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat. This may cause problems with your washing machine.

If the power cable or mains plug is damaged you must call Authorized Service for repair.

Check water hoses for wear. Do not use old/used water inlet hoses. These may cause stains on your laundry.

Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned.

Your washing machine is designed to continue operating in the event of a power interruption. You cannot cancel any program by pressing the

“On/Off button.” Your machine will not resume its program when the power restores. Press the “Start/ Pause/Cancel” button for 3 seconds to cancel the program (See, Cancelling a Program)

There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine.

Some problems you may encounter may be caused by the software.

Press “Start/Pause/Cancel” button

for 3 seconds to cancel the program set in your machine before calling the authorized service.

First Use

To prepare your machine for washing, carry out your first washing process without loading your machine and with detergent under

“Cottons 90°C” program.

Ensure that the cold and hot water connections has been made correctly when installing your machine. Otherwise, your laundry may come out hot at the end of the washing process and may wear out.

If the current fuse or circuit breaker is less than 16 Amperes, please have a qualified electrician install a 16 Ampere fuse or circuit breaker.

While using with or without a transformer, do not neglect to have the grounding installation laid by a qualified electrician. Our company shall not be liable for any damages that may arise when the machine is used on a line without grounding.

To make your machine ready for use, please be sure that the tap water supply and water drainage systems are appropriate before calling the authorized service. If they are not, call a qualified plumber to have any necessary arrangements carried out.

Intended use

This product has been designed for home use.

The appliance may only be used for washing and rinsing of textiles that are marked accordingly.

Only detergents, softeners and supplements suitable for washing machines may be used.

Observe the care instructions labelled on textile products and any other instructions given by

6

TR

Image 6
Contents Washing Machine D2 7081 E D2 7082 E D2 7101 E D2 7102 E D2 7102 ESExplanation of symbols Please read this manual firstTable of Contents Your Washing Machine OverviewSpecifications General Safety First UseIntended use Safety instructions If there are children in your HouseAdjusting the feet InstallationAppropriate installation location Removing packaging reinforcementConnecting to the water supply Connecting to the drainElectrical connection Destroying the packaging materialDisposing of the old machine Preparing clothes for washing Initial preparations for washingSorting the laundry Correct load capacityDetergents and softeners Detergent, softener and other cleaning agentsLoading door Detergent drawerStarch SoftenerLiquid detergent Eliminating lime formationSelecting a program and operating your machine Control panelDisplay symbols Turning the machine onProgram selection Temperature selection Additional programsSpecial programs Spin Speed selection Program selection and consumption table Auxiliary functions Time screenCanceling the time delay Time delayChanging the delay time Starting the programChild-proof lock Switching the machine to standby modeChanging the selections after the program has started Main washEnding the program through canceling Program in rinse hold modeEnd of program Quick instructions for daily use Page Door and the drum Cleaning and careDetergent drawer Outer cabinet and control panelDraining any remaining water and cleaning the pump filter Page Troubleshooting Problem Cause Explanation / SuggestionWater Being taken Improper position Case of a paused Washing Temperatures for a long Although prewash cycle is not selected, Items Nothing is displayed on Page 2820520340EN/250808.0948