Beko D2 7101E Installation, Removing packaging reinforcement, Opening the transportation locks

Page 8

3Installation

Removing packaging reinforcement

Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Opening the transportation locks

CTransportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged!

1.Loosen all the bolts with a spanner until they rotate freely (“C”)

2.Remove transportation safety bolts by turning them gently.

3.Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”)

CKeep the transportation safety bolts in a safe place to reuse when the washing machine needs to be

moved again in the future.

CNever move the appliance without the transportation safety bolts properly fixed in place!

Appropriate installation location

Install the appliance in environments which have no risk of freezing, in a stable and level position.

CThe floor must be capable of carrying the load on it!

CIf the washing machine and a drier are placed on top of each other, their approximate weight together

may reach 180 kg when they are full.

Important:

Do not place the appliance on top of the power cable.

Keep at least 1cm distance from the edges of other furniture.

Place the machine on a firm surface; do not position it on a long pile rug or such like surfaces.

Adjusting the feet

CDo not use any tools to loosen the lock nuts. Otherwise, they can be damaged.

1.Manually (by hand) loosen the lock nuts on the feet.

2.Adjust them until the machine stands level and firm.

3.Important: Tighten all lock nuts up again.

8

TR

Image 8
Contents Washing Machine D2 7081 E D2 7082 E D2 7101 E D2 7102 E D2 7102 ESExplanation of symbols Please read this manual firstTable of Contents Your Washing Machine OverviewSpecifications Intended use General SafetyFirst Use Safety instructions If there are children in your HouseInstallation Appropriate installation locationAdjusting the feet Removing packaging reinforcementConnecting to the water supply Connecting to the drainDisposing of the old machine Electrical connectionDestroying the packaging material Initial preparations for washing Sorting the laundryPreparing clothes for washing Correct load capacityDetergent, softener and other cleaning agents Loading doorDetergents and softeners Detergent drawerSoftener Liquid detergentStarch Eliminating lime formationSelecting a program and operating your machine Control panelProgram selection Display symbolsTurning the machine on Special programs Temperature selectionAdditional programs Spin Speed selection Program selection and consumption table Auxiliary functions Time screenTime delay Changing the delay timeCanceling the time delay Starting the programSwitching the machine to standby mode Changing the selections after the program has startedChild-proof lock Main washEnd of program Ending the program through cancelingProgram in rinse hold mode Quick instructions for daily use Page Cleaning and care Detergent drawerDoor and the drum Outer cabinet and control panelDraining any remaining water and cleaning the pump filter Page Troubleshooting Problem Cause Explanation / SuggestionWater Being taken Improper position Case of a paused Washing Temperatures for a long Although prewash cycle is not selected, Items Nothing is displayed on Page 2820520340EN/250808.0948