Aegis Micro 50420 Loading the Washing, Adding Detergent/Conditioner, Position 1 Stain program

Operating Instructions

Loading the Washing

3See "Program Tables" for maximum loads.

For information about the correct preparation of the washing see "Washing Types and Care Symbols".

0 1. Sort and prepare washing according to type. 2. Open the door: pull the handle on the door.

3. Load the washing.

Important! Do not trap any washing when closing the door! The fabrics and the machine could be damaged!

4. Close the door firmly.

Adding Detergent/Conditioner

3For instructions concerning detergents and conditioners see "Detergents and Conditioners".

0 1. Pull out the detergent dispenser drawer as far as it will go.

2.Add detergent/conditioner.

kPre-wash detergent or stain remover. Only for k (PRE WASH)

and position 1 (STAIN) program.

l Main wash detergent in powder form and water softening agent if used (if you use a water softening agent add the softening agent on top of the main wash detergent.)

wLiquid conditioners (fabric softener, starch)

Important: Do not fill above the MAX mark. When using thick concentrated fabric conditioners and starches we recommend you dilute the concentrate with water to ensure trouble-free dispensing. If using starch powder dissolve according to manufacturers instructions.

3.Push the detergent dispenser drawer right in.

When using Liquid Detergents:

Add liquid detergent with dosing containers provided by the detergent manufacturer. Observe instructions on detergent package.

19