Aegis Micro 50420 manual Electrical Connection, Earth, Blue Neutral, Brown Live

Page 40
Green
& Yellow

Installation and Connection Instructions

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

1WARNING - THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

Before switching on, make sure

the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is located at

the top of the rim of the open

door.

The appliance is supplied with a 13amp plug fitted. In the event of hav- ing to change the fuse in the plug supplied, a 13amp ASTA approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason. The wires in the mains lead are coloured in accord- ance with the following code:

Green and Yellow

: Earth

 

Brown

Blue

: Neutral

Blue

Brown

: Live

 

 

 

 

 

Cord Clamp

The wire coloured green and yellow must be connected to the termi-

nal marked with the letter “E“ or by the earth symbol or coloured green and yellow.

The wire coloured blue must be connected to the terminal “N“ or col- oured black.

The wire coloured brown must be connected to the terminal marked “L“ or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

1 WARNING! A cut off plug inserted into a 13 amp socket is a seri- ous safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

40

Image 40
Contents Lavamat Dear Customer Contents Contents Installation and Connection Instructions Prior to Initial Start-up Safety InstructionsIntended Use Child Safety General SafetyDisposal Environmental TipsFront View Description of the ApplianceDetergent Dispenser Drawer Control panel Program SelectorPosition 5 Conditioner Temperature Selector Consumption Data and Time RequiredON/OFF Button Position Energy SavingPreparing a Wash Load Before Using for the First TimeSorting and preparing a wash load Detergents and Conditioners Washing Types and Care SymbolsCottons ç Which Detergent? Laundry BleachFabric Conditioners Which form?For example Lenor liquid fabric softener, for Using a Water Softening Agent How much Detergent and Fabric Softener?Performing a Washing Cycle Brief InstructionsAdding Detergent/Conditioner Loading the WashingPosition 1 Stain program Starting the Washing Program Setting the Washing ProgramCheck whether the water tap is opened Changing the Spin Speed or Selecting Rinse Hold Program progress indicatorDuring the Washing Program Washing Cycle Complete/Removing the Washing Program Tables WashingWashing with a Pre Wash Separate RinsingSeparate Gentle Rinsing/Starching/Conditioning Separate SpinningMaintenance and Cleaning Clean the suction cap under running WaterWashing Machine Drum DoorWhat to do when… Trouble ShootingModern drive system Appliance does not spin, water in the drum Possible Cause If the Washing Results are not Satisfactory Carrying out an Emergency Emptying Cleaning the Drain Pump 0870 5 929 Customer CareGuarantee Conditions France Senlis +33 44 62 29 Germany Nürnberg +49 Installation and Connection Instructions Installation Safety PrecautionsFront and Side Views Appliance DimensionsRear View Appliance Installation Appliance TransitRemoving Transit Packaging Installation-Site Preparation Levelling the Appliance Electrical Connection EarthBlue Neutral Brown LivePermanent Connection Water Connection Water PressureInlet Hose Connection Hot and Cold Water Connection Water Drainage Technical Data AEG Service ForceWater pressure 10barIndex AEG Hausgeräte GmbH Postfach 90327 Nürnberg